Inconel 601 Coil Supplier, Stockist and Exporter
Table of Contents
Aurico Alloys LLP supplies Inconel 601 coil and slit strip (N06601, Werkstoff 2.4851) to ASTM B168 and AMS 5870 from Mumbai, to customers across India and in more than 40 export markets.
Strip in 601 becomes furnace hardware: muffles and retort liners, baskets and trays, heat shields and burner parts that are blanked, formed and welded from coil. Those parts share one fate – they heat and cool with every batch – and 601’s aluminium-stabilised oxide is what keeps them from scaling away across hundreds of cycles.
Sizes and Specifications
| Grade | Inconel 601 |
|---|---|
| UNS number | N06601 |
| Werkstoff (W.Nr.) | 2.4851 |
| Specifications | ASTM B168 (plate, sheet and strip); AMS 5870 (sheet, strip and plate) |
| Size range | Thickness 0.05 mm to 6.0 mm, width 3 mm to 1250 mm, supplied in slit coil, mill-edge coil or narrow strip. Coil weights and inside diameters are set to suit your decoiler. |
| Condition and finish | Available in annealed and pickled, bright annealed, cold rolled 2B, and No. 4 polished finishes, with edge condition slit, deburred or rolled to order. |
| Certification | EN 10204 3.1 mill test certificate; 3.2 and third-party inspection on request |
| Price | INR 2,800 – 4,500 per kg. Indicative USD 33 – 53 per kg; quoted against grade, form, size and quantity. |
Equivalent Grades & Standards
| Property | Value |
|---|---|
| UNS number | N06601 |
| Werkstoff / EN number | 2.4851 |
| Density | 8.11 g/cm3 |
| Melting range | 1360-1411 °C |
| Specific heat (21 °C) | 448 J/kg·°C |
| Magnetic permeability (200 oersted at 24 °C) | 1.003 |
| Magnetic permeability (200 oersted at -78 °C) | 1.004 |
| Magnetic permeability (200 oersted at -196 °C) | 1.016 |
| Curie temperature | < -196 °C |
| Plate, sheet and strip specification | ASTM B168 / AMS 5870 |
Identifiers and physical constants for Inconel 601. A dash means no such designation is published for this grade.
Chemical Composition
| Element | Min (%) | Max (%) |
|---|---|---|
| Nickel (Ni) | 58.0 | 63.0 |
| Chromium (Cr) | 21.0 | 25.0 |
| Iron (Fe) | — | Balance |
| Aluminium (Al) | 1.0 | 1.7 |
| Carbon (C) | — | 0.10 |
| Manganese (Mn) | — | 1.0 |
| Sulfur (S) | — | 0.015 |
| Silicon (Si) | — | 0.50 |
| Copper (Cu) | — | 1.0 |
Composition limits for Inconel 601. These are specification limits for the grade, not measured values for a lot; the mill test certificate supplied with your order states the actual analysis.
Mechanical and Physical Properties
Strip is supplied annealed for forming, at roughly 550–760 MPa tensile, with the ductility to be blanked and bent into baskets and liners. In service the design value is oxidation resistance to about 1200°C through thermal cycling, not room-temperature strength.
Industry Applications
Why Inconel 601 coil
For furnace parts that cycle, 601 strip outlasts 600 because its scale stays on. For parts that also carry load at temperature, the usual answer is a combination: a furnace is often built with 617 in the load-bearing frame and 601 as the skin facing the heat. Buying 601 in coil keeps the cost of that skin down on long production runs.
| Industry | Typical use |
|---|---|
| Heat treatment | Muffles, retort liners, baskets and trays formed from strip. |
| Industrial heating | Heat shields, burner cones and radiant panels. |
| Chemical processing | Insulating cans and high-temperature process liners. |
| Power generation | Combustion-zone sheet parts in waste-to-energy plant. |
Testing and Certification
Coil is supplied with an EN 10204 3.1 mill test certificate stating heat number, chemical analysis, mechanical properties and temper. Thickness and width are checked against the order, with positive material identification available coil by coil and third-party inspection under our ISO 9001:2015 system.
Frequently Asked Questions
Request a Quotation
Send your size, quantity and specification and we will come back with price and lead time, usually the same working day. Call +91 7977 88 6611 or email info@auricoalloys.com.